TECHNICAL & TROUBLESHOOTING GUIDE

Marine Radar Failure at Sea — Diagnostic Steps & Emergency Attendance

When a marine radar loses transmission or target presentation at sea, check antenna power, transceiver magnetron current, and NMEA sensor inputs before calling MarCom Trade's 24/7 hotline for emergency berth attendance.

Marine radar and ARPA failures severely compromise situational awareness, especially in restricted visibility or congested waters such as the Suez Canal transit approaches. Typical radar faults include magnetron emission depletion, modulator power board failure, scanner motor drive failure, performance monitor failure, or loss of heading/speed sensor communication over NMEA.

Diagnostic steps for the watchkeeper: 1) Verify that the secondary radar (X-band or S-band) is operational and interswitched if fitted; 2) Check the performance monitor reading against vessel baseline records; 3) Inspect transceiver error codes, magnetron high-voltage status, and heading marker alignment; 4) Check power supplies and circuit breakers for the scanner turning unit.

MarCom Trade maintains extensive local stock of marine magnetrons, limiters, circulators, brushes, and transceiver components in Alexandria and Suez for Furuno, JRC, Sperry, Kelvin Hughes, Simrad, and ONWA radars. Our certified radar technicians board vessels at berth or anchorage 24/7 to replace magnetrons, tune transceivers, and ensure Class and Port State Control compliance. Call +20 12 2231 4876 for emergency attendance.

Facing an onboard navigation emergency?

Call our 24/7 emergency hotline at +20 12 2231 4876 to arrange certified engineer attendance and dispatch critical spare parts from local stock.

Call 24/7WhatsAppRequest quote