KNOWLEDGE

Guides, Troubleshooting & Glossary

Direct answers to technical questions from ship managers on navigation, communication, and safety systems — with practical troubleshooting guides for gyro and radar failures at sea.

TECHNICAL GUIDE 01

Permalink

What is GMDSS and what do sea areas A1–A4 mean?

GMDSS is the Global Maritime Distress and Safety System. The equipment a vessel must carry depends on the sea area it operates in, designated A1 to A4.

GMDSS stands for the Global Maritime Distress and Safety System, the international framework under SOLAS for distress alerting, search and rescue coordination, navigational and meteorological warnings, and general communications. Every cargo ship and passenger ship on an international voyage is subject to its carriage requirements.

The radio equipment a vessel carries depends on its designated sea area: A1 (within VHF coverage of coast stations), A2 (within MF coverage), A3 (within INMARSAT satellite coverage, excluding A1/A2), and A4 (the polar and remote waters outside satellite coverage, where MF/HF is required). Further from shore, the required installations grow from VHF DSC to MF/HF radio and satellite equipment.

MarCom Trade advises on the correct GMDSS fit for a vessel's trading area and flag requirements, supplies and installs the equipment, and carries out the radio surveys required to keep the installation certified.

TECHNICAL GUIDE 02

Permalink

How often is a VDR performance test required, and what does it cover?

A Voyage Data Recorder Annual Performance Test is a yearly verification that the VDR and all its sensor inputs record correctly, carried out by an approved service provider.

The Voyage Data Recorder (VDR) preserves the bridge audio, radar images and navigational data leading up to an incident, for use in investigation. Because its evidential value depends on every input working, the system is verified annually rather than only when a fault is suspected.

The Annual Performance Test (APT) is a yearly verification that the VDR and all its sensor inputs record correctly. It is carried out by a service provider approved by the VDR manufacturer, who issues a performance test certificate to be retained on board for survey. MarCom Trade holds APT approvals from Danelec, Netwave, Rutter and Headway.

TECHNICAL GUIDE 03

Permalink

What is BNWAS and why does the bridge need it?

BNWAS is the Bridge Navigational Watch Alarm System — it monitors bridge activity and raises escalating alarms if the watchkeeper becomes unresponsive.

BNWAS stands for Bridge Navigational Watch Alarm System. Its purpose is to detect the incapacitation of the officer on watch: the system requires periodic confirmation of activity on the bridge, and if no confirmation arrives it raises a series of escalating alarms, first on the bridge and then to the master and backup officers.

BNWAS is a carriage requirement for SOLAS vessels, alongside the other security and safe-navigation systems in MarCom Trade's range — SSAS, LRIT, VDR and NAVTEX. The company supplies and installs BNWAS units and can integrate them with the bridge alarm system during installation or retrofit.

TECHNICAL GUIDE 04

Permalink

Gyro Compass Failure at Sea — Immediate Actions & Shore Assistance

A gyro compass failure impairs heading inputs across radar ARPA, ECDIS, and autopilot. Switch immediately to the magnetic compass, inform the watch team, and alert shore support to arrange workshop overhaul upon arrival.

A malfunction in the gyro compass is among the most critical navigational emergencies on board, directly affecting the entire bridge integration. When heading data drifts or fails, ARPA true vectors, ECDIS course stabilization, autopilot steering, and AIS heading transmissions lose validity, creating immediate collision and grounding hazards.

Immediate bridge actions include: disengaging the autopilot and transitioning to manual hand steering; switching radar and ECDIS heading reference to the Transmitting Magnetic Compass (TMC) or magnetic compass; recording compass error; and posting extra navigational lookouts.

MarCom Trade operates a specialized gyro compass overhaul workshop in Alexandria and dispatches service engineers 24/7 to Egyptian ports and Suez Canal transit berths. We service Anschutz (Standard 20/22), Simrad, Yokogawa, Tokyo Keiki, Sperry, and C. Plath gyro systems, maintaining supporting stocks of gyrospheres, supporting liquids, pump units, and transmission step motors. Contact our 24/7 emergency hotline at +20 12 2231 4876 to arrange urgent technician attendance upon your vessel's arrival.

TECHNICAL GUIDE 05

Permalink

Marine Radar Failure at Sea — Diagnostic Steps & Emergency Attendance

When a marine radar loses transmission or target presentation at sea, check antenna power, transceiver magnetron current, and NMEA sensor inputs before calling MarCom Trade's 24/7 hotline for emergency berth attendance.

Marine radar and ARPA failures severely compromise situational awareness, especially in restricted visibility or congested waters such as the Suez Canal transit approaches. Typical radar faults include magnetron emission depletion, modulator power board failure, scanner motor drive failure, performance monitor failure, or loss of heading/speed sensor communication over NMEA.

Diagnostic steps for the watchkeeper: 1) Verify that the secondary radar (X-band or S-band) is operational and interswitched if fitted; 2) Check the performance monitor reading against vessel baseline records; 3) Inspect transceiver error codes, magnetron high-voltage status, and heading marker alignment; 4) Check power supplies and circuit breakers for the scanner turning unit.

MarCom Trade maintains extensive local stock of marine magnetrons, limiters, circulators, brushes, and transceiver components in Alexandria and Suez for Furuno, JRC, Sperry, Kelvin Hughes, Simrad, and ONWA radars. Our certified radar technicians board vessels at berth or anchorage 24/7 to replace magnetrons, tune transceivers, and ensure Class and Port State Control compliance. Call +20 12 2231 4876 for emergency attendance.

GLOSSARY

Marine systems glossary

  • GMDSS — Global Maritime Distress and Safety System
  • VDR — Voyage Data Recorder
  • S-VDR — Simplified Voyage Data Recorder
  • ECDIS — Electronic Chart Display and Information System
  • AIS — Automatic Identification System
  • BNWAS — Bridge Navigational Watch Alarm System
  • SSAS — Ship Security Alert System
  • LRIT — Long Range Identification and Tracking
  • EPIRB — Emergency Position Indicating Radio Beacon
  • SART — Search And Rescue Transponder
  • NAVTEX — Navigational Telex warnings broadcast
  • DSC — Digital Selective Calling
  • AIS — Automatic Identification System
  • NMEA — marine data interface standard
Call 24/7WhatsAppRequest quote