CETC WT-6000 MF/HF DSC Radio for the GMDSS

The CETC WT-6000 is an MF/HF radio with DSC for the GMDSS, transmitting from 1.605 to 27.5 MHz in SSB, AM and DSC modes, with a built-in GPS and a watch on six distress channels at once. MarCom Trade supplies and installs the WT-6000 and checks it during annual radio surveys in Egypt.

Type
MF/HF radio with DSC for the GMDSS
Frequencies
Tx 1.605–27.5 MHz · Rx 0.5–30 MHz
Modes
SSB, AM and DSC
DSC watch
6 distress channels at once, plus 6 routine scan channels
Power supply
13.8 V DC; under 20 A on transmit
MarCom Trade service
Supply, installation and annual radio survey
CETC WT-6000 MF/HF radio front panel with display, keypad and distress button

MF/HF in the GMDSS since 2024

Since 1 January 2024, the revised SOLAS Chapter IV (IMO resolution MSC.496(105)) applies to new and existing ships. Ships trading in sea area A2 carry an MF radio installation with DSC, and in sea area A4 an MF/HF radio installation remains the primary equipment. In sea area A3 the primary system is now a ship earth station of a recognized mobile satellite service, and a single MF/HF set can serve as both the primary MF installation and the duplicated installation (IMO COMSAR.1/Circ.32/Rev.3). HF radiotelex (NBDP) is no longer required for distress and safety communications.

Supplied, installed and surveyed by MarCom Trade

MarCom Trade supplies the WT-6000, installs it with its antenna and GPS connections, and checks it during the annual radio survey, which MarCom Trade performs under approval from DNV, Lloyd's Register, RS, RINA and ABS, and from the Panama and Egyptian flag administrations. The team works from Alexandria and Suez, with a 24-hour hotline.

Technical Specifications

Features

  • SSB, AM and DSC operation modes
  • One-click answer and forwarding of distress alerts and help signals
  • Squelch function
  • Six distress channels on watch simultaneously, six routine scan channels on watch and one fixed SSB channel on watch
  • Built-in GPS, with switching between internal and external GPS; BeiDou (BD) and GLONASS optional
  • Desktop or embedded installation
  • Remote software upgrade

Specifications

ItemValue
Frequency range1.605–27.5 MHz (Tx), 0.5–30 MHz (Rx)
Frequency stability10 Hz
Modulation typeSSB, DSC, AM
Operating temperature−15 °C to +55 °C
Power requirement13.8 V DC (+30 % / −10 %)
Power consumptionRx < 1.0 A; Tx < 20 A (max)
ProtectionOvervoltage, undervoltage, overcurrent, reverse polarity and high-VSWR protection
External interfaceRS-422, USB 2.0

Frequently Asked Questions

Which sea areas need an MF/HF radio like the WT-6000?

Under the revised SOLAS Chapter IV in force since 1 January 2024, an MF/HF radio installation is the primary equipment for sea area A4, and ships in sea area A2 need an MF installation with DSC. In sea area A3, a single MF/HF set can serve as both the primary MF installation and the duplicated installation beside a recognized mobile satellite service.

Can MF/HF radios approved to the old IMO standards still be installed?

Equipment installed on or after 1 January 2024 should meet the revised performance standards, for MF/HF resolution MSC.512(105). Because of supply delays, IMO asked flag Administrations to allow MF and MF/HF installations approved to the previous standards until 1 January 2028 (MSC.1/Circ.1676). Check the unit's type-approval certificate with the flag Administration before installing it on a SOLAS ship.

How much does the CETC WT-6000 cost in Egypt?

The price depends on the antenna, the connections to other bridge equipment and the installation scope. MarCom Trade quotes per vessel: send the vessel name or IMO number and the port for a quotation.

Related Products

Services for this product

Call 24/7WhatsAppRequest quote