Nasa Marine Clipper Tactical Wind Mast Sensor (NMEA 0183)

The Nasa Marine Clipper Tactical Wind Mast Sensor outputs wind speed (0–99.9 knots) and direction (0–360°) ten times per second via NMEA 0183 MWV at 4800 baud, drawing 9 mA at 12 V DC with a 20 m cable and mast kit. MarCom Trade supplies it across Egypt.

Brand
Nasa Marine
Output Protocol
NMEA 0183 MWV sentence, 4800 baud
Update Rate
10 Hz (10 updates per second)
Measurement Range
0–99.9 knots; 0–360° wind direction
Power Supply
12 V DC nominal, 9 mA
Included Cable
20 metres lightweight mast cable & mounting kit
Nasa Marine Clipper Tactical Wind NMEA 0183 masthead sensor with cable and mounting bracket

10 Hz NMEA 0183 Wind Sensing for Manoeuvring Vessels

Updating ten times every second on the standard NMEA 0183 MWV sentence at 4800 baud, the Clipper Tactical Wind Mast Sensor tracks rapid shifts in wind speed (0 to 99.9 knots) and direction (0 to 360 degrees) during harbour berthing and offshore manoeuvres. Because it outputs standard MWV data, it drives Clipper, Target, and Cruiser V2 wind displays as well as any third-party instrument or plotter reading NMEA MWV.

Masthead Kit & Commissioning Support in Egypt

Drawing just 9 mA from a nominal 12 V DC rail, each sensor ships with a mast mounting kit, 20 metres of lightweight down-mast cable, and electrical connectors. For 24 V commercial craft, a regulated 24-to-12 V DC supply is recommended. MarCom Trade supplies replacement mastheads, 20 m cable assemblies, and alignment checks across Alexandria and Suez.

Technical Specifications

Specifications (maker's data)

  • Data output: NMEA 0183 MWV sentence, 4800 baud
  • Update rate: 10 updates per second (10 Hz)
  • Wind speed range: 0 to 99.9 knots
  • Wind direction range: 0 to 360 degrees
  • Supply voltage & current: 12 V DC nominal, 9 mA
  • Supplied hardware: Masthead sensor, mast mounting kit, 20 m lightweight cable, electrical connectors
  • Display compatibility: Nasa Clipper, Target, Cruiser V2 wind systems, and compatible MWV displays

Frequently Asked Questions

Does this sensor require a proprietary Nasa display box, or does it output NMEA directly?

It outputs standard NMEA 0183 MWV sentences at 4800 baud directly from the masthead sensor (at 10 Hz), compatible with Clipper, Target, Cruiser V2, and any compatible NMEA MWV display.

How long is the included mast cable and what voltage is needed?

It ships with 20 metres of lightweight cable and a mast mounting kit, and requires a nominal 12 V DC supply drawing 9 mA.

How much does the Clipper Tactical Wind Mast Sensor cost in Egypt?

Pricing depends on whether you need the mast sensor alone or paired with a cockpit display and mast installation in Alexandria or Suez. Request a quote from MarCom Trade.

Downloads & Documentation

Related Products

Services for this product

Call 24/7WhatsAppRequest quote