Walker FW7702 / FW7703 Magnetic Compass Binnacle

The Walker FW7702 and FW7703 (Lilley & Gillie Sestrel series) are ISO Class A marine magnetic binnacle compass assemblies featuring reinforced glassfibre binnacles, full B, C and Flinders bar correction, 24V DC dimmer lighting, and TMC sensor provisions. MarCom Trade supplies, installs and adjusts Walker compass systems in Egyptian ports.

Brand & lineage
Thomas Walker / John Lilley & Gillie Sestrel binnacle series
Classification & standard
ISO 25862:2019 Class A & IMO Resolution A.382(X)
Binnacle construction
Reinforced glassfibre binnacle with stainless steel fittings
Deviation correction
Full B, C, and H compensating magnets, quadrantal spheres, and Flinders bar
Lighting & control
Twin 24V DC 15W lamps with FW9862 dimmer control unit
MarCom Trade service
Supply, installation, deviation swinging and class certification
Walker FW7702 and FW7703 marine magnetic compass binnacle with quadrantal spheres and Flinders bar

Standard marine magnetic compass requirements under SOLAS V/19

Under SOLAS Chapter V Regulation 19.2.1.1, all vessels must carry a properly adjusted magnetic compass with means of taking bearings over an arc of 360 degrees. The Walker FW7702/FW7703 series provides a robust, weather-resistant binnacle housing suitable for open flying bridge environments, supplied with a full suite of Flinders and Heeling error correction magnets to achieve true heading alignment.

Supplied and adjusted by MarCom Trade

MarCom Trade supplies the Walker FW7702 and FW7703 magnetic compass binnacles for merchant cargo vessels, tugs and commercial workboats in Egypt. Our service engineers install mounting base gaskets, wire lighting controllers, fit azimuth sights, and perform certified compass swinging in Alexandria, Port Said, Damietta and Suez.

Technical Specifications

Features

  • Reduced shipyard installation work with pre-drilled base gasket
  • Improved watertightness around deck and binnacle interface
  • Low overall weight with reinforced glassfibre binnacle body
  • Low voltage 24V DC dimmer lighting within the binnacle
  • Mounting arrangements for various Transmitting Magnetic Compass (TMC) sensors

Technical Specifications

ItemValue
Binnacle MaterialReinforced glassfibre (GRP) binnacle
Deviation CorrectionFull set of compensating magnets for B, C, and H, quadrantal correctors, and Flinders plates
Fixings & boltsRubber base gasket and four stainless steel M20x90 mounting bolts, nuts, and washers
Lighting & ControlTwo 24V DC 15W lamps plus spare lamp, controlled by FW9862 Control Unit with two-position dimmer

Component Weights

ItemValue
Reflector Binnacle35 kg
Non-Reflector Binnacle30 kg
SR4 Compass bowl6.5 kg
Lighting Control Unit0.62 kg
FW9011 Azimuth sight in box1.45 kg

Frequently Asked Questions

What is the difference between FW7702 and FW7703 models?

The FW7702 is configured as a reflector binnacle with an optical periscope tube extending through the deck to the wheelhouse, whereas the FW7703 is a standard non-reflector binnacle designed for bridges using electronic TMC repeaters.

Does the Walker binnacle come complete with deviation correction magnets?

Yes, each Walker binnacle outfit includes a full complement of B (fore-aft), C (athwartships), and Heeling error correction magnets, as well as soft iron quadrantal spheres and Flinders bar plates.

How much does a Walker FW7702 or FW7703 compass binnacle cost in Egypt?

Pricing depends on whether reflector periscope optics or TMC sensors are required, as well as installation and deviation swinging services. Contact MarCom Trade for an official quote.

Related Products

Walker Mk2020S aluminum reflector binnacle magnetic compass assembly with periscope tube

Walker Mk2020S Reflector Binnacle Marine Magnetic Compass

The Walker Mk2020S is an aluminum reflector binnacle magnetic compass system featuring a telescopic periscope extending up to 2 meters, SR4 compass bowl, FW9862 dual-position dimmer lighting control, and mounting arrangements for Transmitting Magnetic Compass (TMC) pickoff coils. MarCom Trade supplies and installs Walker marine compasses in Egyptian ports.

View product
Walker Mk2000S-W marine reflector binnacle compass outfit with optical periscope

Walker Mk2000S-W / Mk2002S-W Reflector Magnetic Compass

The Walker Mk2000S-W and Mk2002S-W are ISO Class A marine reflector binnacle compass systems designed for vessels over 150 GT, fishing vessels over 35m and naval ships, featuring a reinforced glassfibre binnacle, full B, C and Flinders correction and TMC output arrangements. MarCom Trade supplies, installs and swings Walker compasses in Egypt.

View product
Saura MR-150 binnacle reflector magnetic compass assembly with periscope tube

Saura MR-150 Reflector Binnacle Magnetic Compass

The Saura MR-150 is a 150 mm reflector binnacle magnetic compass equipped with full B, C, D, and heeling error correctors, Flinders bars, 24 V DC illumination, and an optical periscope tube for reading ship's heading from the wheelhouse ceiling. MarCom Trade supplies and installs Saura marine compasses across Alexandria and Suez ports.

View product
Autonautic C20-00131 125 mm spare magnetic compass fitted inside wooden storage box with brass latches

Autonautic C20-00131 125 mm Spare Magnetic Compass in Wooden Box

The Autonautic C20-00131 is a Class A 125 mm flat card spare magnetic compass housed in a fitted varnished wooden storage box (245x245x135 mm) with protective cover, built for interchangeable replacement of standard binnacle compasses. MarCom Trade supplies and delivers certified marine compasses across Alexandria and Suez ports.

View product

Services for this product

Call 24/7WhatsAppRequest quote