Walker Mk2000S-W / Mk2002S-W Reflector Magnetic Compass

The Walker Mk2000S-W and Mk2002S-W are ISO Class A marine reflector binnacle compass systems designed for vessels over 150 GT, fishing vessels over 35m and naval ships, featuring a reinforced glassfibre binnacle, full B, C and Flinders correction and TMC output arrangements. MarCom Trade supplies, installs and swings Walker compasses in Egypt.

Application & vessel class
Vessels over 150 GT, fishing vessels over 35 m, and commercial ships
Classification & standard
ISO 25862:2019 Class A & IMO Resolution A.382(X)
Binnacle construction
Reinforced glassfibre (GRP) binnacle with watertight deck periscope seal
Optical periscope
Simple assembly installation and removal with clear optical viewing
TMC sensor provision
Compatible with Lilley & Gillie and standard TMC electronic sensors
MarCom Trade service
Supply, shipyard installation, compass swinging and deviation tables
Walker Mk2000S-W marine reflector binnacle compass outfit with optical periscope

Carriage requirements for vessels over 150 GT and fishing craft

Under SOLAS Chapter V Regulation 19.2.1.1 and Regulation 19.2.2.1, vessels over 150 gross tonnage must be fitted with an approved standard magnetic compass and carry a spare magnetic compass bowl interchangeable with the standard compass. The Walker Mk2000S-W series incorporates the proven 'SR4' card assembly, full B, C and Flinders deviation correctors, and mounting provisions for transmitting sensors to feed off-course alarms and gyro backup systems.

Supplied and certified by MarCom Trade

MarCom Trade supplies the Walker Mk2000S-W reflector binnacle and Mk2002S-W non-reflector outfits along with the SR4 compass bowl, FW9862 dimmer controller and azimuth sights. Our licensed compass adjusters perform deviation swinging in Alexandria, Suez and Port Said to verify compass residual deviation.

Technical Specifications

Features

  • Reduced shipyard installation work with pre-fitted base gasket
  • Improved watertightness around deck and periscope penetration
  • Simple periscope assembly installation, optical adjustment, and removal
  • Low overall weight with reinforced glassfibre binnacle body
  • Low voltage 24V DC dimmer lighting fitted within the binnacle
  • Mounting arrangements for Transmitting Magnetic Compass (TMC) sensors

Technical Specifications

ItemValue
MaterialReinforced glassfibre (GRP) binnacle
Correction SystemFull set of compensating magnets for B, C, and H, quadrantal correctors, and Flinders plates
Fixings & HardwareRubber base gasket and four stainless steel M20x90 mounting bolts, nuts, and washers
Lighting & ControlTwo 24V DC 15W lamps plus spare lamp, controlled by FW9862 Control Unit with dimmer switch

System Weights

ItemValue
Reflector Binnacle (Mk2000S)35 kg
Non-Reflector Binnacle (Mk2002S)30 kg
‘SR4’ Compass Bowl6.5 kg
Lighting Control Unit0.62 kg
FW9011 Azimuth sight in box1.45 kg

Frequently Asked Questions

What is the difference between Mk2000S-W and Mk2002S-W?

The Mk2000S-W is a reflector binnacle fitted with an optical periscope tube that passes through the deck to display the compass card to the helmsman inside the wheelhouse. The Mk2002S-W is a non-reflector binnacle designed for bridges using electronic TMC repeaters or separate steering displays.

How does a TMC sensor provide gyro backup on commercial vessels?

A Transmitting Magnetic Compass (TMC) sensor mounts underneath the SR4 compass bowl and detects card orientation magnetically. It outputs standard NMEA 0183 heading sentences to autopilots, radar and ECDIS, serving as an immediate heading backup if the master gyrocompass fails.

How much does a Walker Mk2000S-W compass binnacle cost in Egypt?

Price depends on reflector periscope length, lighting options, spare compass bowl requirements, and installation services. Contact MarCom Trade for a quotation.

Related Products

Walker Mk2020S aluminum reflector binnacle magnetic compass assembly with periscope tube

Walker Mk2020S Reflector Binnacle Marine Magnetic Compass

The Walker Mk2020S is an aluminum reflector binnacle magnetic compass system featuring a telescopic periscope extending up to 2 meters, SR4 compass bowl, FW9862 dual-position dimmer lighting control, and mounting arrangements for Transmitting Magnetic Compass (TMC) pickoff coils. MarCom Trade supplies and installs Walker marine compasses in Egyptian ports.

View product
Walker FW7702 and FW7703 marine magnetic compass binnacle with quadrantal spheres and Flinders bar

Walker FW7702 / FW7703 Magnetic Compass Binnacle

The Walker FW7702 and FW7703 (Lilley & Gillie Sestrel series) are ISO Class A marine magnetic binnacle compass assemblies featuring reinforced glassfibre binnacles, full B, C and Flinders bar correction, 24V DC dimmer lighting, and TMC sensor provisions. MarCom Trade supplies, installs and adjusts Walker compass systems in Egyptian ports.

View product
Saura MR-150 binnacle reflector magnetic compass assembly with periscope tube

Saura MR-150 Reflector Binnacle Magnetic Compass

The Saura MR-150 is a 150 mm reflector binnacle magnetic compass equipped with full B, C, D, and heeling error correctors, Flinders bars, 24 V DC illumination, and an optical periscope tube for reading ship's heading from the wheelhouse ceiling. MarCom Trade supplies and installs Saura marine compasses across Alexandria and Suez ports.

View product
Autonautic C20-00131 125 mm spare magnetic compass fitted inside wooden storage box with brass latches

Autonautic C20-00131 125 mm Spare Magnetic Compass in Wooden Box

The Autonautic C20-00131 is a Class A 125 mm flat card spare magnetic compass housed in a fitted varnished wooden storage box (245x245x135 mm) with protective cover, built for interchangeable replacement of standard binnacle compasses. MarCom Trade supplies and delivers certified marine compasses across Alexandria and Suez ports.

View product

Services for this product

Call 24/7WhatsAppRequest quote